lubricating property
英 [ˈluːbrɪkeɪtɪŋ ˈprɒpəti]
美 [ˈluːbrɪkeɪtɪŋ ˈprɑːpərti]
网络 润滑性
双语例句
- Medium with worse lubricating property, such as light fuel oil, heavy fuel oil, coal tar, asphalt, viscose, emulsified mixture, etc.
润滑性较差的介质，如轻质燃油、重质燃油、煤焦油、沥青、粘胶液、乳化液等； - Molybdenum disulfide, having good lubricating property, is used as a good solid lubricant.
二硫化钼具有良好的润滑性能，是一种优良的固体润滑剂。 - It has lubricating property, small thermal expansibility, good thermal conductivity and electrical conductivity, applicability within wide temperature sections.
它具有润滑性、热膨胀性小、良好的导热导电性、广泛温区内的可使用性。 - Excellent high and low temperature performance and lubricating property.
具有优良的高低温性能和润滑性能。 - Study on the Lubricating Property of the Oil Blended with VI Improver under Harsh Terms
陕北石油秩序苛刻条件下含粘度指数改进剂油品的润滑特性研究 - The result showed that the lubricating oil added metal powder has excellent antiwear property, especially Bi powder.
结果表明，加有纳米级金属粉的润滑油表现出优良的抗磨性能，其中尤以铋粉最优。 - Effect of nanometer Cu-Ni composite powder's weight fraction on lubricating oil's pressure and antiwear property was studied, the relationships between load and friction coefficient, time and friction coefficient were studied.
研究了金属纳米铜镍复合粉体的添加量对润滑油极压、抗磨性能的影响，考察了载荷变化对添加铜镍复合粉体润滑油减摩性能以及长效减摩性能的影响。 - Manufacturing block copolyformaldehyde with high lubricating property.
高润滑性能的嵌段共聚甲醛的制造。 - Results show that frictional coefficient can reflect that the rolling oils of stainless steel have elastohydrodynamic lubricating property, and fail test load should be more than 981 N. grade.
结果表明摩擦因数能够反映出不锈钢轧制油具有弹性流体润滑特性，失效级负荷应大于981N； - The results show that codeposition of Fe and PTFE can obviously decrease friction coefficient of coating, reduce wear and improve lubricating property of the coating.
结果表明：铁与PTFE共沉积可以显著降低镀层的摩擦系数，减少磨损，改善镀层表面润滑性能。 - The Study of Wheel/ Rail Lubricating Oils and Its Extreme Pressure Antiwear Property
一种轮-轨润滑油的研制及其极压抗磨性 - The Lubricating Property of Active Sulfur Extreme-pressure Agent Mixture
活性硫极压添加剂复合的润滑特性 - An EPU polyurea-calcium acetate composite lubricating grease is introduced and its high temperature performance, water-proof property, long bearing life under high temperature and EP property are also evaluated.
介绍了一种EPU聚脲-醋酸钙复合润滑脂，评价了该脂的高温性能、抗水性能、高温轴承寿命和极压润滑性能。 - It has been more and more important how to improve lubricating property now.
如何提高水基切削液的润滑性能，已成为目前研究的重点。 - The cermet additive exhibited obvious anti-wear and self-repairing function, and it well covered the micro-cracks on the surface, obviously reduced the roughness, and greatly improved the lubricating property.
结果表明：该陶瓷添加剂表现出明显的磨损自修复功能，可以很好地覆盖和修补缸套表面原有的裂纹，显著降低缸套表面的粗糙度，改善缸套的润滑性能； - Study of the Specimen Balls Lubricating Property in Elliptical Contact Zone under Pure Rolling
点接触纯滚动被试轴承球润滑性能研究 - ZSC had a self lubricating ability when there was no lubrication and under oil lubrication its wear resisting property was more excellent when friction rate and load increased.
干摩擦下ZSC具有自润滑能力和良好的耐磨减摩性能，油润下随滑动速度和载荷的增大其耐磨性较ZA27更具优势。 - Rolling contact fatigue is one of the main inactivation types of bearing. Research and improvement of lubricating property of grease are important ways to increase the bearing service life and reliability.
轴承的主要失效形式是滚动接触疲劳，研究和改善润滑剂的润滑性能是提高轴承滚动接触疲劳寿命和工作可靠性的重要途径。 - FeS is a typical solid lubricant. It can reduce the friction and wear effectively because of its porous structure with low hardness, shear strength and good lubricating property.
FeS作为固体润滑材料的突出代表，由于其疏松多孔易滑移，硬度很低，剪切强度很小，有着良好的降低摩擦系数的特性以及良好的润滑性能，有着广泛的应用前景。 - The results shows that the new grinding fluid has good lubricating property, it has obvious superiority in working accuracy and in life of oil stone, therefore it is suitable to the power supersonic honing processing. 4.
完成了新型磨削液在功率超声珩磨中磨削性能的试验研究，研究结果表明：新型磨削液具有良好的润滑性能，在加工精度和油石寿命方面具有明显优势，因此适用于功率超声珩磨加工。 - Select a variety of additives on the basis of the cutting process in accordance with the requirements of national standards and select key indicators of the experiment: the appearance, storage stability, transparency, pH value, anti-foaming, surface tension, corrosion resistance, lubricating property.
选择各种添加剂的基础上，根据切削工艺的要求和国家标准，选择主要的实验指标：外观、存储安定性、透明度、pH值、消泡性、表面张力、腐蚀性、润滑性。